Product Details
Exquisite Steel Craftsmanship
Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.
More Advanced Cooling Support
Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.
High-Performance Built-In Pwm Fans
2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance.
Experience Fan Control On A Whole New Level
The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, press H when you’re pushing your GPU(s) and CPU hard.
Note! The hub supports fans with either 3-PIN or 4-PIN header. However, if you intend to synchronize and control fan speed and noise level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.
Modular PSU Shroud Cover
The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.
Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.
When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.
Even when 2 x SSDs are mounted, the vents on the PSU shroud covers guarantee good ventilation.
Multi-Way Fan/Radiator Bracket
The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.
55MM scenario
Closer to the motherboard for more direct cooling
110MM scenario
Closer to the front panel for thick radiators
How To Install The Multi-Way Fan/Rad Bracket
The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.
Optimized Storage Configuration
With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.
Specifications
| Model | LANCOOL II MESH C performance-X black |
| Dimensions | (D) 478mm x (W) 229mm x (H) 494mm |
| Motherboard | E-ATX(width: under 280mm)/ATX/M-ATX/ITX |
| PSU | 210mm |
| Color | black |
| Materials | Steel 4.0mm tempered glass (both sides) |
| Fan Support | Front: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm |
| Radiator | Front (multi-way fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (aligned to the left) |
| VGA Length | 384mm |
| CPU Clearance | 176mm |
| Drive | Behind MB Tray: 2 x 2.5? SSDBehind the right flip panel: 2 x 2.5”SSD Hard Drive Cage: 3 x 3.5? HDD/2.5? SSD Above PSU Chamber: 2 x 2.5? SSD |
| Slot | 7 |
| I/O Ports | 1 x Fan speed control button1 x TRRS AUDIO 2 x USB 3.0 1 x USB 3.1 TYPEC |
| Dust Filters | 1 x Top (magnetic), 1 x Bottom (tray) |
| Incl Fans | 2 x 140mm PWM Fan (front)
Rated Speed:600 ±200 (30% Duty)-1200RPM ±10%
Air Flow:60.56CFM
Noise:25.8dB(A)1x 120mm PWM fan (rear)
Rated Speed:600 ±200 (30% Duty)-1500RPM ±10%
Air Flow:54.6CFM
Noise:26.1dB(A) |